Create a tranquil oasis with waterfall blade kits. This guide covers essential tips for choosing, installing, and maintaining these serene water features.

Water features can be a calming and soothing addition to any outdoor space. It doesn't matter if you have a large garden or a small balcony, the gentle sound of flowing water can create a peaceful atmosphere for both relaxation and entertainment.

While traditional fountains and ponds have their own charm, many homeowners are turning to more modern and sleek options to add some depth and character to their outdoor areas. One such option involves using well-designed and versatile water blade kits.

How Does a Blade Water Feature Work?

This type of water feature is designed to create a sheet of water that cascades from a horizontal spout, closely resembling a waterfall. The water is pumped from a reservoir and then flows evenly over the blade into a container or pond below, creating a stunning visual effect and soothing sound.

It creates a sleek and contemporary look, particularly in modern gardens or outdoor spaces with a minimalist design. The water blade kits are also available in various sizes, so you can easily tailor them to fit your specific space and preferences.

Why Should You Use Waterfall Blade Kits?

Aside from the obvious aesthetic appeal of these water features, there are several other reasons why waterfall blade kits have become increasingly popular among homeowners.

Sound Benefits

The gentle sound of flowing water can create a relaxing and tranquil ambience, for both commercial and residential spaces. Waterfall blade kits produce a soothing and constant sound that can help mask unwanted noises, such as traffic or neighbour conversations.

Low Maintenance Requirements

Unlike traditional fountains and ponds, waterfall blade kits require minimal maintenance. They don't have any standing water, which means there is no need for constant cleaning or worrying about algae and mosquito breeding.

This is largely due to the fact that the water is continuously flowing, preventing any build-up of debris or stagnant water. This also makes it a more eco-friendly option, as there is no need for harsh chemicals to keep the water clean.

Versatility

They're incredibly versatile and can be incorporated into various outdoor spaces, such as backyard gardens, patios, and even indoor settings like atriums or foyers. They can also be easily integrated into existing ponds or pools, creating a stunning addition to your water feature.

You can even use them in public spaces, such as parks and commercial buildings, as part of the landscape design to add a unique and visually appealing element. They can be installed in various sizes and orientations, making it possible to create a customised look that suits your specific space and preferences.

Components of a Waterfall Blade Kit

Most water blade kits come with pre-assembled components so you can easily set them up and install them yourself.

Water Blade

This central component is responsible for creating the cascading effect of the water. It's typically made of stainless steel, which is durable and resistant to corrosion.

You can find blades in 30cm, 45cm, 60cm, 90cm, 120cm and 150cm sizes, which allows you to customize and control the flow and volume of water according to your needs. Some options also come with an adjustable flow feature, giving you even more control over the general presentation.

Pump

Next is the part that keeps the water flowing from the container to the blade. Most kits come with a submersible pump that relies on a power source to operate. Some options may even have energy-efficient features so you can enjoy the beauty of your waterfall while also saving on electricity costs.

They're placed underneath the surface of the water to account for evaporation and splashing. Make sure to match the flow rate of the pump with the size of your waterfall blade for optimal performance. If it's too little, there may be a veritable dribble of water, and if it's too much, the water may overshoot the blade.

Reservoir

This is where the water collects before it's pumped up to the blade. The reservoir should be large enough to hold an adequate amount of water and have a cover or lid for easy access during maintenance.

You normally have three options in this scenario - purpose-built, hole and rubber pond liner or concrete and block models. The first one features a plastic tub that you bury or build around to hide it.

The second one requires you to dig a hole using a liner that fits in the space but may be more tricky to hide and decorate since you're essentially covering the perimeter in black rubber.

The third option involves constructing a reservoir using concrete and blocks, which is the sturdiest but also requires more effort and skill to complete. You should pass a 25mm diameter hose through the bottom of the reservoir to connect to the water pump so that the water can be pumped up to the blade.

Each type has its own benefits and drawbacks, so choose one that best fits your budget, aesthetic preferences, and technical capabilities. Think about the location of your waterfall and how you can make the reservoir blend in with its surroundings.

Hose and Fittings Kit

Finally, you'll need a hose and fittings kit to connect your reservoir to the pump and waterfall blade. These kits typically include flexible hoses, clamps, and adapters to ensure a secure connection between components. It's important to carefully measure the distance between each component before purchasing a hose and fittings kit to ensure proper fit and functionality.

You'll normally have a choice between PVC and vinyl tubing, with PVC being the more durable option, but also more expensive. Vinyl tubing is cheaper but may need to be replaced more frequently due to wear and tear from exposure to sunlight and water.

Additionally, consider investing in a quick disconnect fitting for easy maintenance, or if you plan on removing the waterfall blade during the winter months. This will allow you to easily detach the hose from the pump without having to cut it or use tools.

How Do You Install a Waterfall Blade Feature?

Once you have all the necessary items in your kit, it's time to start installing your waterfall blade feature.

Firstly, you need to examine your walls and determine the best location for your waterfall blade. Make sure there are no electric wires, plumbing or gas lines in the area where you plan to install it.

The wall composition may vary - from wooden sleepers to plywood and batten bricks or blocks - so you may need different types of fixings for each surface. It's important to use sturdy and rust-resistant materials, especially if your waterfall blade will be in constant contact with water.

Next, attach the mounting bracket securely to the chosen wall using screws or bolts. Make sure it is level and plumb before proceeding. Then, connect the hose and fittings from your pump to the waterfall blade using the appropriate measurements you took earlier.

Once everything is connected, test the water flow and make any necessary adjustments to ensure an even and consistent flow over the waterfall blade.

Finally, add decorative rocks or plants around the base of your waterfall feature for a natural look. You can also incorporate underwater lighting for added visual appeal in the evening hours.

Stay up to date with our latest ideas!

Exclusive deals just for our readers! Click below to unlock special offers and elevate your shopping experience!